Soleus Air FC1-42R-21 - Manual (Page 4)

4
ASSEMBLY
1. First, put the pillar together (c). The pillar is made of two separate halves. Make sure to pass the power
cord (b) through the middle of the pillar before snapping the pillar pieces together and securing them with
the included screws.
2. Now, attach the pillar (c) to the fan body using the included pillar screws.
3. Next, put the fan base (d) together. Like the pillar the fan base is made up of two separate halves. Make
sure to pass the power cord (b) through the middle of the fan base prior to sliding the base pieces together.
There is a groove on the bottom of the fan base for the power cord. Make sure this groove is aligned with
the back of the fan prior to attaching the fan base to the pillar.
4. Once the groove on the bottom of the fan is aligned, attach the fan base using the included base screws.
5. Last, pass the cord through the groove on the fan base (d).