Sony RM-AX4000A - Manual (Page 29)

29
Oper
ating
Executing a series of
actions at a scheduled
time
– Timer function
EPG MENU
SYSTEM CONTROL
OK
1 MORE 4 3
COMPONENT
VOLUME
BACK X PRESS
2
RECALL
LIGHT TIMER
MUTING
SYNC-UP
CHANNEL
EXIT TOOLS
ALL OFF
LEARN
NG
OFF
COMMANDER
The Remote Commander can perform a
programmed commands automatically at
a scheduled time every day or on a
particular day. This function is called
“Timer.”
You can set up to 8 Timer with the
following options.
• Timer ON/OFF
Switches ON/OFF each Timer.
• Key Label
When you press the TIMER button on the
Remote Commander, keys showing a Timer
function appear at the bottom of the display.
The default labels of each Timer are shown as
“PROG1” to “PROG8” and you can change
their labels.
• Commands to be operated
You can program a series of actions (a macro)
to operate at a scheduled time. This is called,
“Timer macro.”
• Time
Sets the operation time (hour, minute, AM/
PM) for a Timer.
• Day
Sets the day(s) for a Timer.
TIMER button
Continued
To perform an easy
action “Air-Slide” for
XPRESS function
The Remote Commander can perform an
XPRESS function by “sliding your
finger” across its display. This function is
called an “Air-Slide function.”
COMPONENT BACK X PRESS LIGHT TIMER SYNC-UP OFF COMMANDER COMPONENT BACK X PRESS LIGHT TIMER SYNC-UP OFF COMMANDER
The Air-Slide has the following 6
patterns.
Default Air-Slide list
How to set the Air-Slide action
For On-PC Setup: See the Help menu
provided in “AX Remote Editor.” You
can set Air-Slide commands other than
for XPRESS function, using “AX Remote
Editor.”
Pattern Programmed commands
XPRESS_TV is performed,
and the display of XPRESS_TV
appears.
XPRESS_A-CBL is performed,
and the display of XPRESS_ A-
CBL appears.
XPRESS_D-SAT is performed,
and the display of XPRESS_D-
SAT appears.
XPRESS_DVD is performed,
and the display of XPRESS_
DVD appears.
No preset
No preset