Setting the lcd display, Setting the automatic-off time of the lcd display, If you want to quit before finishing – Sony RM-AX4000A User Manual
Page 37: If you want to return to the previous display
Unit Settings
37
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The previous status
returns, and the Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button or the COMMANDER
OFF button.
Setting the LCD display
Setting the automatic-off
time of the LCD display
The Remote Commander is preset at the
factory to switch off the LCD display
automatically if you do not operate it for
more than 5 minutes. To change this
setting, perform the following procedure.
1
While pressing the
COMMANDER OFF button,
press the MUTING button.
MUTING
OFF
COMMANDER
“SET” appears as the Display title.
SET
SU
LEARN
NG
LIGHT DISPLAY OTHER
If “DISPLAY” does not flash on the
Label keys, press the Display title
(SET) repeatedly until it appears.
Continued