SVAT Electronics CV1002DVR - Manual (Page 9)

CV1002DVR 7
SVAT ELECTRONICS
Now You Can See
1.2 TV Playback
Connecting to TV: Use the AV Out port to connect the PVR to a TV. This will allow you
to play MPEG 4 video directly on your TV. Insert the black end of the RCA plug into the
AV OUT jack. Insert the red, white, and yellow ends into the TV. Make sure they are
plugged into the VIDEO IN ports. Place the TV on the VIDEO INPUT channel to watch
your PVR footage.
1.3 Main Setup Page 2
Scroll down the setup page to display setup page 2.
1. Time Setup: To set up the date/time, press PLAY on this option, then use the up/down
arrows to set the correct date and time. Use the left and right arrows to move to each
item.
2. Brightness: To adjust the brightness of the LCD display, press the left and right
buttons (Lowest, Low, Normal, High, Highest).