Samsung VP-MX20H - Manual (Page 87)

English_81
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient
lighting conditions.
Press the Control button ( ) will brighten the screen whereas press the
Control button (
) will darken the screen.
A brighter LCD screen setting consumes more battery power.
If you adjust the LCD brightness when the ambient lighting is too bright,
it is hard to see the monitor indoor.
LCD Brightness does not affect the brightness of images to be stored.
You can adjust the LCD Brightness from -15 to 15. •
•
•
•
•
•
LCD Colour
You can change the colour impression of the screen with a variety of colour
options by adjusting the colour rate of red and bue.
When you set red and blue colour range, the higher the figures the brighter the
LCD monitor will be.
You can adjust the LCD colour (red/blue) from -15 to 15, using the Control
button ( / ). •
•
•
Beep Sound
You can set the beep sound to on/off. If there is a beep sound when operate the menu settings, the setting is turned on.
settings contents
on-screen
display
"Off" Disables the function
"On" When on, a beep will sound every time a button is pressed.
When beep sound is set to off, the power on/off sound is off.
The beep sound is off when recording in movie mode.
If you insert AV jack into the memory camcorder, beep sound will be automatically off. •
•
•
Setting the LCD Colour does not affect recordings.
1
15
0
1.JAN.2008 12:00
1
C.N
0
0