SMC Networks Barricade SMC2804WBR38 - Manual (Page 42)

Configuring the Wireless Barricade g Router
32
Fixed-IP xDSL
Some xDSL Internet Service
Providers may assign a fixed
(static) IP address. If you have
been provided with this information,
choose this option and enter the
assigned IP address, gateway IP address, DNS IP addresses,
and subnet mask. Click FINISH to complete the setup.
PPPoE
Enter the PPPoE User Name and
Password assigned by your
Service Provider. The Service
Name is normally optional, but
may be required by some service
providers.
Leave the Maximum Transmission Unit (MTU) at the default
value (1454) unless you have a particular reason to change it.
Enter a Maximum Idle Time (in minutes) to define a maximum
period of time for which the Internet connection is maintained
during inactivity. If the connection is inactive for longer than the
Maximum Idle Time, it will be dropped. (Default: 10)
Enable the Auto-reconnect option to automatically re-establish
the connection as soon as you attempt to access the Internet
again. Click FINISH to complete the setup