Silvercrest KH 451 - Manual (Page 6)

- 4 -
Tips for safety:
• In cases of danger, immediately remove the power
plug from the wall socket.
• Use the appliance exclusively for the purposes
described in these operating instructions.
• Always be alert! Always pay attention to what
you are doing and act w wiitthh cco om mm mo onn sse ennsse e. Never
use the appliance when you are distracted or
don’t feel well.
• Ensure that the appliance is correctly and com-
pletely assembled before taking it into use. The
appliance can first be taken into use when the
clamps have been closed.
• After every use of the juice extractor ensure that
the On/Off switch is moved to the position "Off"
("0"). . The motor must come to a complete stop
before you begin to disassemble the appliance.
• Remove the power plug from the wall socket
when the appliance is taken out of use, when
removing components and before cleaning it.
• Do not use the appliance outdoors.
Assembling and operating the
appliance
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
o ,
- to the left, the container for fruit pulp and
vegetable mash s
- to the right, the outlet pipe for the juice y .
Warning:
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice catchment bowl t on the app-
liance base u , so that the three tenons and the
juice outlet y are securely caught in the recesses.
2. Place the filter d on the drive shaft f and press
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
3. Place the housing lid e on the juice catchment
bowl t , so that the loading shaft is sitting above
the cutters of the filter d .
4. Ensure that the housing lid e is sitting firmly in
the recesses of the juice catchment bowl t . Lift
the clasps r and hook them into the notches on
the housing lid e .
5. Press the lower part of the claps r against the
appliance until they engage.
6. Slide the container for fruit pulp and vegetable
mash s from below under the ejection shaft.
7. Push the foam separator plate in the separate
juice collector h and then put the lid on. Place
the separate juice collector h next to the appli-
ance so that the juice outlet y projects into the
juice collector h .
8. Insert the power plug i into the wall socket.
IB_KH451_46613_LB6.qxd 14.01.2010 10:13 Uhr Seite 4