Magicinfo – Samsung SyncMaster 320MXn-2 User Manual
Page 89
MagicInfo
Available Modes
z
PC / DVI
z
AV
z
HDMI
z
MagicInfo
z
TV
Note
z
The TV menu is available when a TV tuner box is installed.
z
MX-2 model can use MagicInfo menu when mounted Network box.
Note
z
For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using a separate USB
keyboard.
z
For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only
if the LCD Display turns on.
z
Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop.
If you do unplug the cable, restart the system.
z
Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop.
z
To access other sources, press the SOURCE button in MagicInfo.
z
The preset password for the LCD Display is "000000".
z
The server program's Power-On option works only if the LCD Display's power is completely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down since this
may cause system errors on the LCD Display.
z
In the OSD image of MagicInfo, Network mode is the same as Device.
z
When using MagicInfo with the MagicInfo Server Program: perform Network mode.
z
When using MagicInfo with the device directly connected to LCD Display : execute Device mode.
z
Press ALT + F12 to directly go to the MagicInfo Window screen.
z
To setup MagicInfo on a Windows screen, a keyboard and mouse are required.
z
To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.
It is highly recommended not to turn off the AC power during an operation.
z
For pivoted LCD Displays, ticker transparency is not supported.
z
For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies.
z
For drive D:, EWF is not applied.
z
When the contents of Setup have been changed when EWF is in the Enable state, to save the changes in the disk,
you must Commit them.
z
By selecting Disable, Enable or Commit, the system is restarted.
MagicInfo