Samsung SCC-B2311 - Manual (Page 16)

16
User’s guide
E
Connect the cables and check the operation
1. Connect one end of the BNC cable to the VIDEO OUT port
of the monitor.
2. Connect the other end of the BNC cable to the VIDEO In port.
Connect the camera to the power adaptor. Use a slotted
flat (-) screwdriver to connect one end of the two-line power
adaptor to the DC/AC IN port of the camera.
(GND: marked with a white line on the cable)
- You can plug in to a power outlet regardless of the polarity
for both AC 24V and DC 12V adaptor.
IN
OUT
VIDEO IN Terminal on
the rear of moniter
BNC Cable
VIDEO OUT Terminal