Sony 300 - Manual (Page 50)

50
4-function button
ZOOM/SET/ RIGHT( ) button
When the menu is displayed on the LCD monitor, the SET button is used for confirming data
that is changed by using the / /
buttons.
When the menu is not displayed on the LCD monitor, pressing the SET button activates the
following.
- Normal display : Press the RIGHT ( ) button to switch to the Digital
Zoom Playback Screen.
- Thumbnail display : The thumbnail display is changed to Normal display by
pressing the SET( ) button.
- When a movie clip is selected : A movie clip is played back or paused by pressing the
SET( ) button.
- When the slide show is selected : the slide show is started or paused by pressing the
SET( ) button.
Image enlargement
1. Turn the camera power on.
2. Select the PLAY mode by rotating the mode dial.
3. Select the desired image by pressing /
button.
4. Press the RIGHT ( ) button to display the Digital Zoom Bar on the LCD monitor, as shown.
5. Use the UP( )/ DOWN( ) buttons to select the desired digital zoom magnification.
6. When you press the RIGHT ( ) button, the zoom bar disappears and ( ) marks will blink
on the enlarged image.
7. Different parts of the image can be viewed by pressing the / / / buttons.
8. Pressing the MENU button will zoom back to the original full sized image.
Normal display
Pressing the
RIGHT button
Pressing the
MENU button
Pressing the
RIGHT button
Pressing the
UP/DOWN button
Digital Zoom Playback Screen
Digital Zoom Confirmation Screen Digital Zoom Selection Screen
EXIT:MENU
EXIT:MENU SET:
EXIT:MENU SET: