Sherwood LAD-500(R) - Manual (Page 12)

Guides for USB downloader management program
12-12
A. Equalizer mode
Set the equalizer mode for the music file before downloading, you
can listen to the music file on the audio card with that equalizer
mode. The supported modes are Flat, Jazz, Pop, Classic, Rock,
Voice and Movie. Flat is the default mode that don’ t set the
equalizer mode.
B. Rename file
You can change the music file name first.
This change comes under the list; the name of that file in computer
does not change.
The extension cannot be changed.
C. Compress and compress as local file(s)
Compress the music file(s) and save that in the computer.
1) Select the compression ratio.(A)
2) Select the target folder to save and click OK.(B)
*The program compresses the file(s) according to selected
compression ratio and saves that in the selected target folder.
Remark: The pre-encoded files has .brm file name extension. If
you want to save these files later, the program will automatically
skip a compression action although a compression mode is set.
You cannot play the files on your HDD or any MP3 player.
4.3. Error messages and recovery
1. The below message is displayed when the audio card is not
connected.
This is the error message taken place when do the function related
to audio card while the card is not connected. In this case, check
the connection with audio card and the USB downloader.
2. The below message is displayed when user disconnect the USB
cable from USB downloader in using this management program.