Sony STR-DA5ES - Manual (Page 86)

86
Remote control RM-LJ305
Remote control system
Infrared control
Power requirements 4.5 V DC with three LR6
(size-AA) alkaline
batteries
Dimensions 175
Ч
62
Ч
33 mm
Mass (approx.) 135 g excluding batteries
Remote control RM-US105
Remote control system
Infrared control
Power requirements 3 V DC with two R6
(size-AA) batteries
Dimensions 210
Ч
45
Ч
25 mm
Mass (approx.) 95 g excluding batteries
General
Power requirements 120 V AC, 60 Hz
Power consumption
Models of area code U
STR-DA5ES:
420 W
STR-DA3ES: 410 W
Models of area code CA
STR-DA5ES:
470 W
STR-DA3ES: 450 W
Power consumption (during standby mode)
1 W
AC outlets 2 switched, 120 W/1A
Dimensions 430
Ч
174
Ч
465 mm
including projecting parts
and controls
Mass (Approx.)
STR-DA5ES: 20.0 kg
STR-DA3ES: 20.0 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Audio/video/control S cord (1)
Control S cord (mini jack) (1)
Remote commander RM-LJ305 (STR-DA5ES) (1)
Remote commander RM-US105 (STR-DA5ES) (1)
Remote commander RM-PP505L (STR-DA3ES) (1)
R6 (size-AA) batteries (2)
LR6 (size-AA) batteries (3) (STR-DA5ES only. For
RM-LJ305)
For details on the area code of the component you
are using, see page 4.
Design and specifications are subject to change
without notice.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range
With 10-kHz tuning scale: 530 – 1710 kHz 4)
With 9-kHz tuning scale: 531 – 1710 kHz 4)
Antenna Loop antenna
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m,
400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
4) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down TUNING + and press
?/1. All preset stations will be erased when you
change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Specifications (continued)