Samsung CDI-E207-010 - Manual (Page 120)

118
Disconnected
Wireless connection has disconnected. Either shorten the
distance between the camera and the wireless print adapter;
change the orientation of the camera or the angle of the wireless
print adapter; or change the channel settings. Then establish a
wireless connection again.
Too many devices registered
8 target devices are already registered. If you wish to register
additional devices, use [Delete Registration] to delete target
devices you no longer use.
Registration failed
Registration has failed. Either shorten the distance between the
camera and the wireless print adapter, or change the orientation
of the camera or the angle of the wireless print adapter. Then
carry out registration again. Also, if “Press the SETUP button”
appears on the LCD monitor at the time of registration, press the
camera’s SETUP button within 10 seconds.
Already registered
Registration of the same wireless print adapter has already been
completed.