Sony CMT-DV2D - Manual (Page 8)

8 GB
Perform the following procedures 1 to 6 to hook up your system using the supplied cords and
accessories. The terminals on the rear side vary depending on the country model. Be sure to check the
connection procedure.
1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER jacks as shown below.
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Plug type A
Getting Started
Hooking up the system
AM loop antenna
Front speaker (Left)
FM antenna
Front speaker (Right)
Black/Stripe (#)
Gray/Solid (3)
Insert only the stripped portion
Extend the FM lead antenna horizontally
AM loop antenna