Southwestern Bell 26963 - Manual (Page 29)

29
H
EADSET AND
B
ELT
C
LIP
O
PERATION
(O
PTIONAL
)
C
ONNECTING A HEADSET TO
THE HANDSET
For hands free conversation,
connect the headset (optional) to
the HEADSET jack as shown. The
handset receiver and microphone
are disabled when the headset is
connected.
Adjust the headset to rest comfort-
ably on top of your head and over
your ear. Move the microphone to
approximately 2 to 3 inches from
your mouth.
• Press the TALK button to answer
or place a call before using the
headset.
C
ONNECTING THE
B
ELT
C
LIP
There are two slots, one on each
side of the handset.
• Attach the belt clip (optional) by
inserting the sides of the belt clip
into the slots. Snap the ends of
the belt clip into place.
H E A D S ET
HEADSET
jack
Headset plug
Slot for
belt clip Slot for
belt clip