Using your sunbeam burr grinder – Sunbeam EM0430 User Manual

Page 6

Advertising
background image

Before using your Sunbeam Burr Grinder,
wipe the base exterior, grinding bowl and
portion-control container clean with a damp
cloth. Wash the grinding bowl lid, portion-
control container lid and ground coffee
container and its lid in warm soapy water.
Allow to dry completely before use.

Note: Do not immerse the upper burr grinding
wheel in water or any other liquid.

Note: Do not place any parts of the Sunbeam
Burr Grinder in the dishwasher.

For first-time grinding

Important: During manufacturing, the upper
burr grinding wheel is positioned so that it is
very close to the lower burr grinding disk. To
ensure the grinder performs properly, proceed
as follows:

1. Place the Sunbeam Burr Grinder on a dry,

level surface.

2. Check to make sure that the grinding

bowl is free of any foreign objects and
that it is completely clean and dry.

3. Set the grind fineness selector to number

‘9’.

4. Fill the grinding bowl with 3 to 4 scoops

of coffee beans and position the grinding
bowl lid to the bowl.

5. Plug the power cord into a 230-240V AC

power outlet and switch the power on.

6. Turn the power switch on the Sunbeam

Burr Grinder to ‘ON’, the switch will
illuminate.

Note: Ensure that the lid on the grinding bowl
is secure and in place.

7. Push the ‘GRIND’ button for 2 seconds

and release. The Sunbeam Burr Grinder
will grind all the beans in the grinding
bowl, once empty it will then stop
automatically.

8. Turn the power switch on the Sunbeam

Burr Grinder to ‘OFF’.

9. Remove the lid to the grinding bowl and

fill bowl with 3 to 4 scoops of coffee
beans. Replace the lid.

10. Set the grind fineness selector to number

‘4’, this is to ensure that the upper burr
grinding wheel is moving properly.

11. Turn the power switch on the Sunbeam

Burr Grinder to ‘ON’.

12. Push the ‘GRIND’ button for 2 seconds

and release.

Note: Your Sunbeam Burr Grinder is now
prepared to be used on a regular basis.

Grinding

1. Place the Sunbeam Burr Grinder on a dry,

level surface.

2. Check to make sure that the grinding bowl

is free of any foreign objects and that it is
completely clean and dry.

4

Using your Sunbeam Burr Grinder

Advertising