Samsung SCH-U440 - Manual (Page 41)

Voice Service 33
Voice S
e
rvice
Voice Service
Activating Voice Service
Voice recognition allows you to say commands to perform common functions
supported by your phone. There is no voice training required to use the voice
recognition feature. You simply say the pre-designated command displayed on
your screen in a normal tone of voice to perform the desired function.
To activate voice recognition:
1. Press for Menu.
2. Select Tools.
3. Select Voice Service.
Tip: You can also activate Voice Service from standby mode by pressing and
holding the
key.
4. Wait for the beep and then say one of the following commands:
When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, it de-activates voice recognition without taking any action.
Note: If you want to use another button to activate voice recognition press for
Menu, and select Settings > Launch Pad. Through this menu, you can change
button assignments, including the button used to launch "Voice Service", which is
the voice recognition application.
Using Voice Dial
Voice Dial allows you to dial any valid 7, 10, or 11 digit North American phone
number by speaking the number naturally, without pausing between the digits. It
also allows you to dial by pronouncing a name stored in your Contacts.
•
Call
•
Send Picture
•
Go To
•
Send Text
•
Lookup
•
Check
MENU
OK
MENU
OK
u440 BMC Guide.book Page 33 Wednesday, October 8, 2008 10:17 AM