Soundstream Technologies SA.244 - Manual (Page 5)

n
1.
2.
3.
4.
5.
6.
7.
8.
9.
IO.
11.
12.
13.
14.
15.
18.
17.
18.
19.
20.
21.
22
Key to
Connected to fuse or circuit breaker, then battery’s positive post.
Ground Main ground connection. Bolt to a clean chassis ground in the
vehicle.
Remote Remote turn-on input from the head unit. Accepts
2V.
LED indicates amplifier power on.
Speaker Output Connections Sub Channels.
Bass Adjustable bass equalization circuit, 0 to boost at 45
Hz-Sub Channel only.
Input Level Variable from 40mV to
Channel.
Inputs Right and channel inputs; Subwoofer Channel.
Speaker Output Connections Channels 1 2
Input Level Variable from
to 1 2.
Inputs Right and left channel inputs; only right channel input used in
“Mono” mode-Channels 1 2.
Speaker Output Connections Channels 3 4
input Level Variable from 1
to 3 4.
Inputs Right and left channel inputs; only right channel input used in
“Mono” mode-Channels 3 4.
[underside] Main Fuse Main power supply fuse. Replace only with same
fuse value.
[underside] Xover S.I.P. Crossover frequency setting for subwoofer
channel.
[underside] Bass
Switch On/Off switch for bass equalization
circuit-Subwoofer Channel.
[underside) Subwoofer Input Select Selects sub channel input from
internal (Channels l-4) or external.
[underside] Amplifier Crossover Switch Select high pass or full range
operation-Channels 1 2.
[underside] Stereo/Bridged Mono Switch “Mono” for bridged operation
(use only right channel input) or “Stereo” for
Stereo or Mixed
Mono operation; See crossover section for more details-Channels 1 2.
[underside] Amplifier Crossover Switch Select high pass or full range
operation-Channels 3 4.
[underside] Input/Stereo/Bridged Mono Select Selectable inputs from
internal (from channels 1 2) or external and stereo or mono-Channels 3
4. “Mono” for bridged operation (use only right channel input) or “Stereo”
for 2-channel Stereo or Mixed Mono operation.