Sony DVP-NS30 - Manual (Page 20)

20
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 57)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 57)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
9
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
◆ Video signals
• VIDEO (page 57)
◆ S video signals
• S VIDEO (page 57)
◆ RGB signals
• RGB (page 57)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
If you did not connect an AV amplifier
(receiver), select “NO,” then go to step
15.
If you connected an AV amplifier
(receiver) using just an audio cord, select
“YES: LINE OUTPUT L/R (AUDIO),”
then go to step 15.
If you connected an AV amplifier
(receiver) using a coaxial digital cord,
select “YES: DIGITAL OUTPUT.”
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
13
Press ENTER.
“DTS” is selected.
14
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select “ON.” Otherwise,
select “OFF.”
15
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 60).
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND: 16:9
ON
JACKET PICTURE
LINE:
VIDEO
VIDEO
S VIDEO
RGB
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
ON
DOWNMIX: DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM: 48kHz/16bit
DTS: DOLBY DIGITAL
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
ON
DOWNMIX: DOLBY SURROUND
D-PCM
PCM
DTS:
48kHz/96kHz PCM: OFF
OFF
ON