Samsung BN68-01416A-00 User Manual
Page 41
English - 41
−
Software Upgrade (Option)
To keep your product up-to-date with new digital television
features then software upgrades are periodically broadcast
as part of the normal television signal. It will automatically
detect these signals and display the software upgrade
banner. You are given the option to install the upgrade.
Software Inforamtion
Press the
ENTER button, then the current software
version is shown. To display the software version
information, press the
ENTER button again.
Manual Upgrade
Press the
ENTER button to search for new software from the currently broadcasting channels.
Standby Mode Upgrade : On / Off
Press the
ENTER button. To continue software upgrade with master power on, Select On by
pressing the ▲ or ▼ button.
45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since
the power of the unit is turned on internally, the screen may be on slightly for the PDP product.
This phenomenon may continue for more than 1 hour until the software upgrade is completed.
−
Reset
You can reset the values stored to the factory default values.
➢
The Reset operation deletes all channel information
and user preferences returning all values to their default
factory state.
Press the
ENTER button with Reset selected.
The
Enter PIN is displayed.
Enter your current 4-digit PIN code by using the
numeric buttons (0~9). The warning message is
displayed. All values will be reset by pressing the
coloured buttons (red, green, yellow, and blue) in turn.
➢
The default PIN of a new TV set is “0-0-0-0”.
➢
When PIN is changed in Child Lock, the PIN for
resetting automatically changes.
When reset is complete, it operates DTV Plug & Play
(DTV Auto Store, Time Zone-depending on the country,
Time Setting) and exits from the digital TV mode without changing to the analog TV mode.
(Refer to page 10)
WARNING: All channel settings and user preferences will be
lost and returned to the factory defaults. It is recommended
that a reset is performed only when serious problems are
experienced.
Reset
Return
DTV
Software Information
Manual Upgrade
Standby Mode Upgrade : On
Software Upgrade
Move
Enter
Return
DTV
BN68-01416A-Eng.indb 41
2008-2-29 17:20:46