Sharp AR-BC320 - Manual (Page 92)

REDUCTION/ENLARGEMENT/ZOOM
5-14
6 Ensure that the desired paper size has
been automatically selected based on the
selected copy ratio or select another size
as needed.
Auto paper select display
7 Use the numeric keys to set the desired
number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy
can be made with the
copy number display
showing "0".
8 Press the [COLOR COPY START ( )]
or [BLACK COPY START ( )] key.
If you placed the original
on the document glass,
set the output to "Sort",
you must touch the
[READ-END] key after
all pages of the original
have been scanned.
(Step 7 on page 5-8)
NOTE
If the auto paper select display does not appear, no
appropriate paper size for the selected ratio is
available.
Use the [C] (clear) key to cancel an entry if a mistake
has been made.
To return the ratio to 100%
To return the ratio setting to 100%, touch the [COPY
RATIO] key to display the ratio menu and then touch
the [100%] key. (Steps 2 and 3 on page 5-13.)
8½x14
AUTO
EXPOSURE
AUTO
ORIGINAL
AUTO 8½x14
PAPER SELECT
77 %
COPY RATIO
PLAIN
INTERRUPT
ORIGINAL
8½x11
0
8½x11
8½x11
DUPLEX
11x17
WhaleII_general-copy_SEC.book 14 ページ ２００４年９月１４日 火曜日 午前１１時４５分