Sharp XL-MP150E - Manual (Page 28)

03/12/17 XL-MP150E 19-28.fm
28
XL-MP150E
Tape Recording
Recording on a cassette tape (continued)
Recording from a CD or MP3/WMA disc
You can record the desired disc using the CD DIRECT PLAY button.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the cassette compartment with side A
facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the button to choose one side or both sides.
... To record on both sides.
... To record on only one
side.
5 Press the button.
Recording will be paused.
6 Press one of the 1 - 5 buttons to select the desired disc.
7 Within 5 seconds, press the CD DIRECT PLAY button to
start recording.
Recording starts from side A.
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.