Radio operations – JVC KD-G531 User Manual

Page 7

Advertising
background image

7

ENGLISH

3

Finish the procedure.

To check the current clock time while the
power is turned off

Clock time is shown on the
display for about 5 seconds. See
also page 15.

Radio operations

~

Ÿ

!

Start searching for a station.

When a station is received, searching stops.
To stop searching, press the same button
again.

To tune in to a station manually

In step

!

above...

1

Lights up when receiving an FM stereo
broadcast with sufficient signal strength.

2

Select a desired station frequency.

When an FM stereo broadcast is hard to
receive

Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequential
Memory)

1

Select the FM band (FM1 – FM3) you want to

store into.

2

3

“SSM” flashes, then disappears when automatic
presetting is over.

Local FM stations with the strongest signals are
searched and stored automatically in the FM band.

Lights up when monaural mode is activated.

EN06-13KD-G531_003A_2.indd 7

EN06-13KD-G531_003A_2.indd 7

11/13/06 11:39:30 AM

11/13/06 11:39:30 AM

Advertising