19 adjusting the sound characteristics, Attenuating the sound, Changing the sound and display settings – Sony MDX-C7970R User Manual

Page 19

Advertising
background image

19

Adjusting the sound
characteristics

You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.

1

Select the item you want to adjust by
pressing
(SOUND) repeatedly.
Each time you press (SOUND), the item
changes as follows:

VOL (volume) n BAS (bass) n TRE (treble) n

BAL (left-right) n FAD (front-rear)

2

Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
functions reverts to volume control.)

Attenuating the sound

Press (ATT) on the rotary commander or
optional wireless remote.
“ATT on” flashes momentarily.

To restore the previous volume level, press
(ATT) again.

Tip
The unit decreases the volume automatically when
a telephone call comes in (Telephone ATT
function).

Changing the sound and
display settings

The following items can be set:
• Clock (page 8)
• CT (Clock Time) (page 17)
• D.Info (Dual Information) to display the clock

and the play mode at the same time (on) or to
display the information alternately (off).

• Amber/Green to change the illumination

colour to amber or green.

• Dimmer to change the brightness of the

display.
— Select “Auto” to dim the display only

when you turn the lights on.

— Select “on” to dim the display.

• Contrast to adjust the contrast if the

indications in the display are not recognizable
because of the unit's installed position.

• Beep to turn on or off the beeps.
• RM (Rotary Commander) to change the

operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary

commamder as the factory-set position.

— Select “rev” when you mount the rotary

commander on the right side of the
steering column.

• M.dspl (Motion Display) to turn the motion

display on or off.

• A.Scrl (Auto Scroll) (page 9, 21)

Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be disabled.

1

Press (SHIFT).

2

Press (3) (SET UP) repeatedly until the
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:

Clock n CT n D.Info* n Amber/Green n

Dimmer n Contrast n Beep n RM n M.dspl

n A.Scrl*

* When no CD or MD is playing, this item will

not appear.

Note
The displayed item will differ depending on
the source.

continue to next page n

Advertising