Sangean RCR-3 - Manual (Page 11)

10
GB
How to set Radio Alarm (Alarm 3 and Alarm 4)
The Radio Alarm will sound for 1 hour, or stop by pressing the
Power button. The Radio Alarm volume may be adjusted through
the Alarm sound level control button on the bottom of the radio.
1. Press the Alarm 3 (or Alarm 4) button and Alarm 3 time
(or Alarm 4) time will show on the display.
2. Press the SET button, the alarm hour will show on the display.
3. Press TUNING up or down button to adjust the hour.
4. Press the SET button again and adjust the minute by pressing
TUNING up or down button.
5. Select required days of week on which the alarm will beep by
pressing day of week buttons. (press the day buttons again to
deactivate the days)
6. Press the SET button again and press BAND button to select
FM or AM (MW), and press TUNING up or down button to tune
into the station that you wish to wake up and adjust volume.
7. Press the SET button to complete the setting.
8. Press the Power button to switch off the radio.
9. When it is buzzing, the or mark is blinking.
Press the Power button to stop the buzzer. And the or
mark will stop blinking.
10. When the radio signal is weak, the radio alarm will be
buzzer alarm.
* You can press the Alarm 3(or Alarm 4) button anytime to complete
the setting.
* When it is AUX-IN, and the radio band is not set, the alarm will be
buzzer alarm.