Sprint Nextel SCP-8400 - Manual (Page 173)

Section 2J: Using Your Phone’s Built-in Camera 157
Using the Macro/Normal Switch
The macro/normal switch located on the front of the phone
allows you to take close-up shots. Slide the macro/normal
switch to switch between Normal and Macro (close-up)
modes. When you select Macro mode, the
icon appears on
the display.
Note: After using the camera for close-up shots (“Macro”mode), be sure to
switch the camera back to the “Normal”setting.
Note: Placing the switch in-between the macro and normal setting may
result in out-of -focus images. For best results, slide the switch completely to
one position or the other.
Setting the Flash
To activate the flash:
1. From camera mode, select Options (right softkey) > Flash.
2. Select one of the following options and press :
Ⅲ Off to deactivate the flash.
Ⅲ On This Shot to activate the flash for one shot.
Ⅲ On Always to activate the flash for all pictures.
Ⅲ Auto to activate the flash automatically.
Note: While the phone is open and in camera mode, press to switch
between flash modes.
Normal
Macro
C
amer
a