SpectraLink ROLM PBX - Manual (Page 8)

SpectraLink Corporation LinkPlus Interface Guide
Siemens ROLM PBX System
2.4 Feature Programming Requirements
Line Sequences
The handset uses two types of key sequences to access PBX features and multiple
lines. Line sequences are those where the user presses the
LINE button and then a
number button. The key-map design designates “line” keys that should be
programmed for line appearance so that they correspond to line sequences on the
handset.
The
LINE icon on the handset will reflect activity on the corresponding deskset key.
For this reason, it is recommended that line appearance keys be used only for line
access. If only one line is assigned to a particular handset, leave the other designated
line keys identified on the key maps unassigned. The corresponding handset
LINE +
key sequences will then have no function.
• Lines 10-19 are not supported on the handset.
Function Sequences
Function sequences are those where the handset user presses the
FCN button and
then a number button. Designated “function” deskset keys programmed to system
features such as Transfer and Conference may have their corresponding menu items
display on the handset function menu. See the key map diagram for the function
keys that are available for feature programming.
2.5 Function Menu Programming
Link 3000 MCU
The function menu text defaults for the handsets associated with the Link 3000
MCU can be changed via the SpectraLink Operator’s Console.
Link 150 MCU
For the Link 150 MCU, the handset function menu text can only be changed via
remote configuration through the services of SpectraLink’s Customer Support.
NetLink Telephony Gateways
Function menu text options can be changed in the Administration Console of the
NetLink Telephony Gateways.
Hold
The Hold feature should be programmed to the Hold key as shown on the Key-map
Diagrams so that when the HOLD button is pressed on the handset, the call is
placed on hold.
Mute
The handset Mute function is hard-coded in the Link WTS to
FCN + 1 . This function
sequence is recommended, but the system administrator can assign the Mute
function to any available function key sequence or leave the function unassigned.
Part Number: 72-0171-13-C.doc Page 8