Solid State Logic C200 HD - Manual (Page 3)

www.solid-state-logic.com
C200 HD. This is SSL.
Broadcast Features
Service and support
• Hot-swap fader cassettes for transparent servicing.
• Front panel design allows access to all serviceable parts from the
front of the console.
• Quick-release component mechanisms for simple maintenance.
• Local and remote diagnostics for real-time monitoring and
troubleshooting tools from any location.
• SSL service and support.
Mobile configurations
Fit 48 channel strips (105 faders) across 2.34m (92")
with the C200 HD Mobile
For easy installation into remote vehicles, the C200 HD ‘Mobile’
console reduces the overall width of the desk by 387mm, and enables
48 channel strips to fit across the width of any standard truck. To
achieve this, the standard dual width centre section is reduced to
single width.
The TFT display, trackball, keyboard and custom metering are mounted
externally, and key control functions condensed into the single width
section. Each bay of the C200 HD Mobile is 334mm wide, bringing the
total width for 48 faders plus mobile centre section to 2341mm
including 3mm for thin end trim.
Broadcast specific operation includes:
• Simultaneous Mains, Minis and PFL monitoring for complex
production management.
• Status Lock for disabling potentially destructive console functions
such as Solo-in-place, Dynamic Automation and console
status changes.
• In-line architecture provides large amounts of channel, mix minus,
clean feed and multi-track send flexibility.
• Integrated digital routing for fast and efficient source handling, and
selective reset control provides the ability to handle complex
production requirements.
• Freely assignable mono and stereo channels for flexible
console layouts.
• Mono Left and Mono Right enable the operator to react quickly to
unexpected changes in a stereo feed.
• Backstop PFL enables the operator to pre-fade listen any input by
simply pulling back on the channel fader.
• Dedicated signal level meter on every large fader for clear visibility
of signal presence.
Weight and rack space savings
Weight savings are made through careful front panel construction and
the opportunity to remove the console’s legs and use mounting beams
for support. All Channel and Mix DSP, I/O and GPI options are
contained within a single 15U rack-mounted Centuri core. Remote
controlled stageboxes handle either 24 or 48 mic inputs per unit, with
interference-free multimode fibre optic connections to the truck.
Essential Production Features
Flexible frame configurations provide extensive mixing capacity from a
compact control surface
• Virtual Bays access all processing channels by swapping ‘hidden’
channels into the sweet spot master bay.
• Frame customisation options enable DAWs to be housed within the
console frame for an ergonomic mixing/editing solution.
Integrated machine control removes the need for an external
synchroniser system
• 4-port SD & HD machine control system with advanced control and offset
options.
• Dedicated timecode memories provide fast autolocation to any point in
the scene.
• Trackball, keyboard and video switching from console to DAW enables
the operator to move seamlessly between mixing and editing operations.
Scene-based automation, designed for mixing to picture
• Non-linear dynamic automation enables the operator to write moves at
any speed.
• Join allows you to easily rehearse and write settings for a scene.
• Off-line editing functions provide tools for dealing with scene
re-ordering or removal.
• Project re-configuration enables mixes to be switched in seconds.
Multi-format channels, bussing and monitoring for
multi-stem applications
• Parameter linking across multiple channels allows processing to be
applied simultaneously across all legs of a multi-channel source,
e.g. 5.1 stem.
• Unique PanPoint ™ operation provides precise surround panning control.
• 5.1 and stereo monitoring system, with external source summing to
combine Music, Dialogue and Effects stems.
Variable sample rate support provides operation at pull-up or
pull-down frequencies
• Operate at 44.1kHz, 48kHz, 88.2kHz or 96kHz, or any 0.1% pull-up/
pull-down derivative.
• All digital I/O are fitted with 24-bit sample rate conversion to handle
multiple sample rates.