Sony CDX-C580 - Manual (Page 18)

18
EN
Selecting specific tracks
for playback
— Bank (CD changer with custom file
function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
Bank edit mode
Note
If you have not labeled the disc, the bank edit
mode does not appear. To go back to the
normal playback mode, press (SHIFT).
2
Push the SEEK/AMS control up or down
to select the track number you want to
skip and press (5) (ENTER).
The indication changes from “PLAY” to
“SKIP.” If you want to return to “PLAY,”
press (5) (ENTER) again.
3
Repeat step 2 to set the “PLAY” or “SKIP”
mode on all the tracks.
4
Press (3) (PLAY MODE) for two seconds.
The unit returns to the normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set the “PLAY” and “SKIP” mode on up
to 24 tracks.
• You cannot set the “SKIP” mode on all the
tracks.
PLAY MODE ENTER
DISC TRACK CD2
PLAY MODE ENTER
DISC TRACK CD2
PLAY MODE
BANK CD2
BANKON
Playing the specified tracks only
You can select:
•BANK-ON to play the tracks with the
“PLAY” setting.
•BANK-INV (Inverse) to play the tracks with
the “SKIP” setting.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
“BANK” appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z BANK-ON z BANK-INV z BANK-OFF
Playback starts from the track following the
current one.
3
Press (SHIFT).
To go back to the normal playback mode,
select “BANK-OFF” in step 2 above.