Setting the time – Samsung AS24A1(A2)QE/B User Manual
Page 8
Setting the Time
E-
8
Your air conditioner contains a clock used to start and stop the unit
automatically at a given time.
You must set the time when you:
◆ Purchase the air conditioner
◆ Replace the batteries
N
N
o
o
t
t
e
e
Be sure to reset the time when you change clocks from
standard todaylight savings time and vice versa.
Setting the Time for the First Time
1
Insert the batteries.
◆
Push the battery cover on the rear of the remote control with your
thumb and remove it.
Result:
The clock starts.
2
Using a small pointed tool (ball-point pen for example), Press the button.
Result:
The AM indication flashes.
3
To set the current time, press the or
buttons under the cover on
the remote control.
To...
Then...
Increase the time in one-minute intervals
Press the (
▲
)button.
Increase the time in ten-minute intervals
Hold down the (
▲
)button.
Decrease the time in one-minute intervals
Press the (
▼
)button.
Decrease the time in ten-minute intervals
Hold down the (
▼
)button.
Result:
AM or PM is displayed to indicate whether the setting
corresponds to a time before or after midday.
4
When you are satisfied with your setting, confirm the time. To do so:
using a small pointed tool (ball-point pen for example), press the button.
Result:
◆
The AM or PM indication stops flashing.
◆
The clock starts.
Resetting the Time
If you have already set the time but wish to change it, proceed as
follow.
1
Using a small pointed tool (ball-point pen for example), press the button
under the remote control flap.
Result:
The AM or PM indication flashes.
2
Set the time, following the instructions in Step 3 in the procedure above.
3
When you are satisfied with your setting, confirm the time. To do so,
press the button, using a small pointed tool (ball-point pen for
example).
Result:
◆
The AM or PM indication stops flashing.
◆
The clock starts.