Step 4: connecting the audio cords, Select a connection – Sony DVP-CX777ES User Manual
Page 22
22
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 71),
TVS WIDE (page 71)
(page 24)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 71)
or
MD deck/DAT deck
• Surround effects: None
(page 25)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 26)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 101)
– DTS (5.1 ch) (page 101)
– Super Audio CD Multi channel (page 101)
or
AV amplifier (receiver) with digital input jacks
having a Dolby or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 101)
– DTS (5.1 ch) (page 101)
(page 27)
A
D
A
B
C
D