JVC KD-PDR51 - Manual (Page 15)

15
ENGLISH
Indication, [Range]
BAS * 2 (bass), [–06 to +06]
Adjust the bass.
MID * 2 (mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE * 2 (treble), [–06 to +06]
Adjust the treble.
FAD * 3 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL * 4 (balance), [L06 to R06]
Adjust the left and right speaker balance.
S.BS * 2 (super bass), [S.BS ON or S.BS OFF],
[01 to 05, initial: 03] * 5
Maintain the richness and fullness of the bass sound
regardless of how low you set the volume.
SUB.W * 1 (subwoofer), [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50 * 6 ]
Adjust the volume.
* 1 Displayed only when “L/O MODE” is set to “WOOFER”
(see page 17).
* 2 When you adjust the bass, mid-range, treble, or super
bass, the adjustment you have made is stored for the
currently selected sound mode (iEQ) including “USER.”
* 3 If you are using a two-speaker system, set the fader
level to “00.”
* 4 The adjustment will not affect the subwoofer output.
* 5 Range adjustment for super bass is adjustable only
when it is set to “S.BS ON.”
* 6 Depending on the amplifier gain control setting. (See
page 17 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Continued on the next page
EN14-19_KD-PDR51_003A_1.indd 15 EN14-19_KD-PDR51_003A_1.indd 15 11/8/06 4:13:19 PM 11/8/06 4:13:19 PM