Sunrise Medical G-424 User Manual

Page 4

Advertising
background image

7

931155 Rev. A

A. SOLID SEAT BACK

Do not use the Solid Seat Back to push or lift the wheelchair. Improper use may
cause the back to unexpectedly detach from the wheelchair.

B. DRIVING

You should drive your chair with the tilt at the minimum angle.

C. TILTING

To prevent damage and personal injury, avoid tilting near objects such as walls,
tables or chairs.

To avoid injury, ensure other people, especially children, are clear of the system.

If using a swing-away abductor, be sure not to tilt with the abductor swung away.
Otherwise, the abductor may collide with the tilt actuator when returning to the
untilted position.

D. CHANGES & ADJUSTMENTS

Never use non-Quickie parts or make changes to your chair unless authorized by
Sunrise. (Doing so will void the warranty and may create a safety hazard.)

1. If you modify or adjust this chair it may increase the risk of fall or tip-over.
2. Modifications unauthorized by Sunrise constitutes remanufacturing of the

wheelchair. This voids the warranty. The rider then assumes all future
liability for the wheelchair.

E. LOCKING PINS

Never use or operate this device without the use of all locking pin devices. (p. 11)

1 V .

W A R N I N G S

!

6

931155 Rev. A

1 1 1 .

Y O U R C H A I R A N D I T S P A R T S

Weight

172 lbs. with swing-away footrests
and armrests, without batteries

Drive Wheels

14" x 3"
Tire types:
Standard - pneumatic
Option - airless insert, solid

Joystick

Standard - integral (right-hand or

left-hand mount)

Option - remote (left-hand or

right-hand mount)

Option - swing-away retractable

joystick

Batteries

(2 batteries required to operate chair)
Option - GP 24 deep cycle gel,
Option -

22 NF

deep cycle gel

Battery Charger

Standard - off board (Lester)

Colors

Refer to current order form

Chair Parts

Standard - black

Seat Frame Dimensions

Seat Frame width: standard - 14"-20"
Seat depth: 14"-20" adjustable
Solid seat back
Aluminum seat pan
Optional cushions: Jay Cushions

CG Tilt

0° - 50°
3° - 53°

Backrest

Standard - Non-folding: 15" - 20"
Straight Backpost - standard

Footrest

Standard - Swing-away with angle-

adjustable footplates
and heel loops.

Option - elevating legrests

and multiposition

Casters

Standard - 7" solid
Option - 7" pneumatic

7" solid insert

Armrests

Standard - dual post flip back
Option - height-adjustable dual post
or single post with desk or full
length waterfall pads or standard
armpads

Swing-Away Lateral Thoracic Supports

Option - Curved
Option - Straight

Headrest

Standard - 8" x 5" or 7" x 4.5"
headrest pad

All features may not be available with
some chair setups or in conjunction
with another chair feature. Please
consult your supplier for more
information.Your authorized supplier
can also provide you with more
information on accessories.

QUICKIE G-424 INTEGRATED C.G.TILT

Advertising