Sony GV-D800 - Manual (Page 52)

52
Changing the menu settings
Icon/item
AUDIO MIX
PB MODE
A/V t DV OUT
LCD B. L.
LCD COLOR
Mode
—––
z AUTO
/
z OFF
ON
z BRT NORMAL
BRIGHT
—––
Meaning
To adjust the balance between the stereo 1 and stereo 2
To automatically select the system (Hi8/standard 8 or
Digital8 ) that was used to record on the tape, and play
back the tape
To play back a tape that was recorded in the Hi8/
standard 8 system when your VCR does not
automatically distinguish the recording system
To convert digital video signals into analog video signals
via your VCR
To convert analog video signals into digital video siginals
via your VCR
“A/V
t DV” appears on the LCD screen ( p. 47).
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the color on the LCD screen
Notes on AUDIO MIX
• You can adjust the balance only for tapes recorded in the Digital8 system.
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on PB MODE
The mode will return to the default setting when
– you remove the battery pack or power source.
– you turn the POWER switch to OFF.
Note on LCD B.L.
When you select BRIGHT, battery life is reduced by about 10 percent during recording.
to lighten to darken
ST1 ST2