Sony TA-VE700 - Manual (Page 7)

7 EN
Getting Started
Hookups
The arrow ç indicates signal flow.
TV monitor
If you use a TV monitor, do not connect anything to the TV/
LD VIDEO IN jack.
VCR (via the VIDEO 1 jacks)
If you have two VCRs, connect the second one to the VIDEO
2 jacks.
TV or LD player (via the TV/LD jacks)
Video camera recorder/Video game
Use the VIDEO 3 INPUT jacks on the front panel.
Where do I go next?
Go on to the next section to connect the mains lead and
complete your home theater system.
MONITOR
OUT
VIDEO
OUT
INPUT
VIDEO
Amplifier TV monitor
AC Hookups
Connecting the mains lead
Connect the mains lead from this amplifier and from
your audio/video components to a wall outlet.
If you connect other audio components to the
SWITCHED AC OUTLET on the amplifier, the
amplifier can supply power to the connected
component so you can turn on/off whole system when
you turn on/off the amplifier.
Caution
Make sure that the power consumption of the component
connected to the amplifier’s AC outlet does not exceed 100
watts. Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this outlet.
Where do I go next?
Before you use the␣ amplifier, go to the next section to make
sure that all the controls are set to the appropriate positions.
Before You Use Your Amplifier
Before you start using your amplifier, make sure that
you have:
• Turned MASTER VOLUME to the leftmost
position (0).
• Selected the appropriate speaker system. (For
details, see “Selecting the speaker system” on
page 6)
• Set BALANCE to the centre position.
Turn on the amplifier and check the following
indicator.
• Press MUTING on the remote if MUTING appears
in the display.
SWITCHED AC OUTLET
/
to a wall outlet
OUTPUT
VIDEO VIDEO
AUDIO AUDIO
VIDEO 1
IN
VIDEO
IN
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
L
R
L
R
INPUT
OUT
Amplifier
VCR
L
R
L
R
TV/LD
OUTPUT
VIDEO
IN
AUDIO
IN
VIDEO
AUDIO
Amplifier
TV or LD player
OUTPUT
VIDEO
AUDIO
L
R
VIDEO 3 INPUT
VIDEO L – AUDIO – R
Video camera recorder
or video game Amplifier