Sony WALKMAN MZ-E25 - Manual (Page 2)

z
AC
• AC
• AC
AC-E15L
EIAJ
AC
•
•
•
•
•
•
•
•
?
• No
DISC
b
•
b HOLD
•
b
•
Lo BATT
b
•
b ‘ ’
•
BLANK
b
•
ERROR
b
•
b
1
2
30
3
•
b PLAY MODE
f
1
•
b =
AC AC-E15L
NH-9WM
BC-9HM
CPA-8
DCC-E215
* MDR-D55 MDR-
D77 MDR-E888SP
SRS-A41 SRS-
A91
CK-
MD4
CK-
MD10
* 2
English
As you read, refer to the
illustrations in the Japanese text.
Welcome!
Welcome to the world of the MiniDisc! Here
are some of the capabilities and features you
will discover with the new MiniDisc player.
• Thin body, compact MiniDisc player.
• You can operate this player by inserting
either a dry battery or a “chewing-gum
type” rechargeable battery into the battery
compartment of the player.
• Shuttle dial remote control with LCD
Keep the main unit in your pocket and
operate the MiniDisc player through the
shuttle dial on the remote control; The LCD
diplays track information, playback mode
as well as battery condition.
z MD playing
Playing an MD! A
You can operate the player on a dry battery.
You can also operate the player on a
rechargeable battery or house current (see
"Power Sources").
The player automatically switches to play the
stereo or monaural sound according to the
recorded sound.
1 Open the battery compartment lid and
insert an LR6 alkaline battery like the
illustration in this manual.
The battery should last for about 6 hours
of continuous playback before the need of
replacing the battery.
2 Insert an MD.
1 Slide the OPEN switch and open the
lid.
2 Insert the MD with the label side
facing up, and press the lid down to
close.
3 Play the MD.
1 Connect the headphones (supplied) to
the remote control.
2 Connect the headphones with remote
control (supplied) to the
2 (headphones) jack of the player.
3 Press (. (Turn the control to
(•+ on the remote control.)
The player starts to play the first track.
A short beep sounds in the
headphones.
4 Press VOLUME +/– buttons or the
VOL +/– buttons on the remote
control to adjust the volume.
You can check the volume in the
display on the remote control.
To stop play, press p.
A long beep sounds in the headphones.
Other disc operation
To
Pause
Find the
beginning of
the current
track
Find the
beginning of
the next track
Go backwards
while playing*
Go forward
while playing*
Remove the
MD
* To go backwards or forward quickly without
listening, press P and hold down = or +
( keep the control turned to =or (•+
on the remote control).
** Once you open the lid, the point to start play
will change to the beginning of the first track.
If the playing does not start
Make sure the player is not locked. See “To
lock the controls”.
Playing tracks repeatedly B
Press the PLAY MODE button on the remote
control while the player is playing an MD.
Each time you press the PLAY MODE button,
the play mode indication on the remote
control changes as follows:
(none) (normal play)
All the tracks are played once.
v
" f" (all repeat)
All the tracks are played repeatedly.
v
" f 1" (single repeat)
A single track is played repeatedly.
v
" f SHUF" (shuffle repeat)
All the tracks are played repeatedly in
random order.
Using other functions
To know the track name and time C
Press the DISPLAY button on the remote
control while the player is playing an MD.
Each time you press the DISPLAY button, the
lapsed time of the current track and the track
number, the track name and number, and the
disc name and the number of the track
recorded on the MD appear.
Note
Disc and track names appear only with MDs that
have been electronically labeled.
To lock the controls D
Slide the HOLD switch in the direction of the
c.
To emphasize bass (Digital Mega
Bass function) E
Slide the DIGITAL MEGA BASS switch and
choose 1 (slight effect) or 2 (strong effect).
To protect your hearing (AVLS) F
Set the AVLS (Automatic Volume Limiter
System) switch to LIMIT.
The volume is kept at a moderate level, even
if you try to turn the volume above the
limited level.
z Power Sources
Using on a rechargeable battery
G
1 Charge the rechargeble battery NH-9WM
(not supplied) with the battery charger.
Refer to the instructions manual that
came with the charger for charging.
A fully-charged battery should power
consecutive playback for about 4.5 hours
before you need to recharge it.
2 Open the battery compartment lid and
insert the charged battery.
When to replace or recharge the
battery
When b flashes in the display, the dry
battery or the rechargeable battery is weak.
Replace the dry battery or recharge the
rechargeable battery. When the battery
power is gone, "LoBATT" flashes in the
display of the remote control and the power
goes off.
Using on house current H
Before using the player, remove the
rechargeble battery if it is installed.
Connect the AC-E15L AC power adaptor (not
supplied) to the DC IN 1.5V jack of the player.
Do not use any other AC power adaptor.
Do this (Beeps in the
headphones)
Press P on the remote
control (Continuous short
beeps)
Press
P again to resume
play.
Press = once
Turn the control to =
on the remote control
(Three short beeps)
Press + once
Turn the control to
( •+ on the remote
control (Two short beeps)
Keep pressing =
Keep the control turned to
= on the remote control
Keep pressing
+
Keep the control turned to
( •+ on the remote
control
p and slide OPEN to open
the lid.**
v
•
b
• 1
•
b
•
b 2 ( )
•
b VOLUME ( VOL)
b AVLS NORM
GaAlAs
790 nm
400 rpm 900 rpm CLV
ACIRC
44.1 kHz
ATRAC
EFM
2
1
20 20,000 Hz 3 dB
:
5mW+5mW
16 Ω
3 1
NH-9WM
DC 1.5 V
AC
AC 100 V 50 60 Hz
102 17.2 75 mm
130g
170g
1
2
3 1
1
1
1
1