Specialized Turbo Comp - Manual (Page 8)

watch function will operate
when the “TOP” button is
pressed. The stopwatch will
record the total time after
the button is pressed
regardless of whether there
is speed input or not.
Interval Timer (INT)-
The interval timer is dis-
played on the lower line of
the screen when (INT)
appears on the left. The
timer indicates the end of
an interval with one short
beep per second for the last
4 seconds of the interval.
This is followed by a long
beep, indicating the begin-
ning of a new interval.
Trip Distance (DST)-
Trip distance mode will
record up to 999.99 miles
or kilometers and then roll
to zero. The trip distance
can be reset by pressing
the “SET” button for three
seconds. The resolution is
0.01 miles (0.01
Kilometers). The trip dis-
tance is shown on the
lower line if the screen.
(See figure19)
Odometer (ODO)-
The odometer will record
the total distance traveled
up to 99,999 miles or kilo-
meters and then roll to
zero. The odometer can be
reset by pressing the “SET”
button for three seconds.
The total distance is shown
on the lower line if the
screen.
Programmable Odometer-
The odometer digits are
programmable. This is con-
venient for transferring
your hard-earned mileage
that is usually lost when
changing batteries or com-
puters.
15
imum speed is retained in
memory and updated
when a higher speed is
maintained for three sec-
onds. The maximum speed
can be reset by pressing
the “SET” button for three
seconds. (See figure 17)
Auto Start/Stop Timer
(ATM)-
In ATM mode the timer
function records the actual
time spent riding. It oper-
ates only when there is
speed input and is dis-
played In the Digital
Display Area of the screen
Timer Mode (TIMER)-
In TIMER mode the stop-
14
Clock-
Your Turbo® Comp is
equipped with a digital
clock. The clock can be set
to operate in either 12 or
24-hour mode.
Second Wheel Option-
For riders who own more
than one bicycle or who
frequently change tires, the
Turbo® Comp is capable
of storing two tire sizes.
You can change between
the two sizes by entering
Distance Mode and select-
ing TRIP. Then, press the
“MODE” button for three
seconds. The second wheel
mode indicator will change
from 1 to 2. Mileage
recorded will be cumulative
between the two sizes. (An
accessory handlebar mount
is available from your
Specialized dealer. P/N
4814-5045)
TROUBLESHOOTING:
Display is blank:
Change the battery or
press the AC button on the
bottom of the case
FIGURE 17
FIGURE 19