JVC KD-G521 - Manual (Page 14)

14
ENGLISH
2
Indication pattern changes as you adjust the level.
Ex.: When “TRE” is selected
Indication [Range]
BAS* 1 (bass)
Adjust the bass. [–06 to +06]
TRE* 1 (treble)
Adjust the treble. [–06 to +06]
FAD* 2 (fader)
Adjust the front and rear speaker balance.
[R06 to F06]
BAL (balance)
Adjust the left and right speaker balance.
[L06 to R06]
LOUD* 1 (loudness)
Boost low and high frequencies to produce
a well-balanced sound at low volume level.
[LOUD ON or LOUD OFF]
VOL (volume)
Adjust the volume. [00 to 30 or 50*
3 ]
* 1 When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “USER.”
* 2 If you are using a two-speaker system, set the
fader level to “00.”
* 3 Depending on the amplifier gain control
setting. (See page 16 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Ex.: When you select “DIMMER”
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the procedure.
EN12-17KD-G521[EY]f.indd 14 EN12-17KD-G521[EY]f.indd 14 9/16/05 12:04:10 PM 9/16/05 12:04:10 PM