SMC Networks SMCNAS24 - Manual (Page 61)

NOTE: A warning message will appear if there is no USB printer connected to your storage
system.
5. When the message of confirmation appears, click “OK” to confirm.
NOTE: When setting up the USB printer on your computer, you need to specify the storage
system’s IP:631/printers/PrinterServer.
UPS (Uninterruptible Power Supply)
Allow your storage system to use a USB-UPS as temporary backup power.
1. Connect a USB-UPS to any USB port on your storage system.
NOTE: When using the USB-UPS and the power level is not adequate, an email alert will
be sent for informing you to shutdown the storage system immediately.
2. Click “UPS” on the “Advanced” page and the following screen appears.
53