Configuring chargers via a pc, Using several tourguide systems simultaneously, Specifications – Sennheiser Tourguide Charger L 2021-40 User Manual

Page 15

Advertising
background image

DE

EN

FR

IT

ES

NL

13

Specifications

Configuring chargers via a PC

The “Conference Control” software offers additional possibilities to
configure the receivers and to display the configurations in detail. The
“Conference Control” software and the corresponding instruction manual
are included on the supplied CD.

Using several Tourguide systems simultaneously

If you are using several Tourguide 2020 D systems to give more than one
guided tour or one conference at the same time, the systems can interfere
with one another. To prevent this happening, you have to set the simulta-
neously used systems (a system is one transmitter and any number of
receivers) to different channels.

Specifications

Ambient temperature during charging

+3°C to

+40°C

Connector

3-pin, protection class I,
as per IEC/EN 60320-1

Mains voltage

100 to 240 V~
(50 or 60 Hz)

Primary power consumption

max. 150 W

Charging voltage per charging compartment typ. 5 V

Charging current per charging compartment max. 400 mA

Charging time for receiver
rechargeable battery

approx. 2.5 hrs

In compliance with

EMC EN 301489-1/-9

Radio EN 300422-1/-2
Safety EN 60065
47 CFR 15 subpart B

Dimensions in mm (W

× H × D)

approx. 483

Ч 399 Ч 172

Weight (empty)

approx. 8.8 kg

Advertising