Sun Microsystems 7000 - Manual (Page 16)

5. Select the Dynamic Discovery tab.
6. Click Add. Enter the IP address of the Sun Storage 7000 Unified Storage System. Click OK.
7. Click Close.
8. Click the Rescan link to have VMware ESX discover the Sun Storage 7000 Unified Storage
System iSCSI LUNs.
9. It is recommended that you enable any CHAP configuration after all iSCSI LUNs have been
discovered.
10. After the Rescan completes, select Configuration -> Storage to add the iSCSI LUN as a
DiskDevice and create a VMFS3 file system on the LUN. Optionally the iSCSI LUN can be
used as a Raw Device Mapping device.
16 Using Sun Storage 7000 Unified Storage System With VMware ESX Server
Figure 11: iSCSI Initiator