Sony SLV-D261P User Manual

Page 99

Advertising
background image

99

General setup information

Ad
d

itiona

l In

fo

rm
ation

Attaching the external antenna connector

Attaching a VHF/UHF band mixer

5

Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH).

The channel you selected in step 4 appears on the TV screen. If the channels
change when you press CH +/–, you have made the correct setting.

Whenever you use the DVD-VCR, set the TV to the channel selected in step 1.

When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use an antenna connector
(not supplied) to connect the antenna to the
DVD-VCR.

1

Loosen the screws on the antenna connector.

2

Wind the twin leads around the screws on the antenna connector.

3

Retighten the screws.

When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use a VHF/UHF band separator/
mixer (not supplied) to connect the antenna
to the DVD-VCR.

1

Loosen the screws on the mixer.

2

Wind the twin leads around the screws on the mixer.

3

Retighten the screws.

4

Connect the 75-ohm coaxial cable to the mixer.

300-ohm twin
lead cable

Antenna
connector
(not supplied)

300-ohm twin
lead cable

VHF/UHF
band
separator/
mixer (not
supplied)

75-ohm coaxial
cable

Advertising