Sony KV-21LT1U - Manual (Page 8)

8
1
Connect the TV plug to the mains socket (220-240V AC,
50Hz)
The first time the TV set is connected, it is usually turned
on. If the TV is off, press the
on/off button on the TV
set to turn on the TV.
The first time you press this button, a Language menu
displays automatically on the TV screen.
2
Press the or button on the remote control to select
the language, then press the OK button to confirm your
selection. From now on all the menus will appear in the
selected language.
3
The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
4
A new menu appears on the screen asking you to check
that the aerial is connected. Ensure the aerial is connected
and then press the OK button to start the automatic
tuning.
The TV starts to automatically search and store all
available channels (TV Broadcast) for you.
This procedure could take some minutes. Please be
patient and do not press any buttons, otherwise the
automatic tuning will not be completed.
Language
Select Language:
English
Español
Français
Italiano
Magyar
Nederlands
OK
Do you want to start
automatic tuning?
Yes
No
OK
K
K
Please confirm that
aerial is connected
Confirm
OK
Programme: 01
Channel: C21
Auto Tuning
Searching...
K
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screen appear on the TV enabling
you to: 1) choose the language of the menu screen, 2) search and store all available channels
(TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the
screen.
However, if you need to change the language menu, change or repeat the tuning (e.g. when
you move house) or rearrange again the order of the channels afterwards, you can do that
by selecting the appropriate menu in the (Set Up). For more information, refer to the
“Menu Guide” section of this instruction manual. You can also do that by pressing the
Auto Start Up Button on the TV set.
First Time Operation
continued...
03KV-21LT1UGB.fm Page 8 Friday, May 4, 2001 5:42 PM