Control for hdmi” (bravia sync) others – Sony BDP-S780 User Manual

Page 34

Advertising
background image

34

The message “A new software version is
available. Please go to the "Setup" section
of the menu and select "Network update"
to perform the update.” appears on the
screen when turning the player on.

, See “Network Update” (page 26) to update

the player to a newer software version.

You cannot start the PARTY STREAMING
function.

, Check that “Party Auto Start” is set to “On”

in “Network Settings” (page 31).

The “Control for HDMI” function does not
work (BRAVIA Sync).

, Check that “Control for HDMI” is set to

“On” (page 30).

, If you change the HDMI connection, turn

the player off and on again.

, If power failure occurs, set “Control for

HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 30).

, Check the following and refer to the

instruction manual supplied with the
component.
– the connected component is compatible

with the “Control for HDMI” function.

– the connected component’s setting for

the “Control for HDMI” function is
correct.

, When you connect the player to a TV

through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not

compatible with the “Control for HDMI”
function, you may be unable to control
the TV from the player.

– if you change the HDMI connection,

disconnect and reconnect the AC power
cord, or a power failure occurs, try the
following:

1

Switch the input selector of

the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen.

2

Set “Control for HDMI” to

“Off,” then set “Control for HDMI” to
“On” (page 30). Refer to the instruction
manual supplied with the AV amplifier
(receiver).

The System Power-Off function does not
work (BRAVIA Sync).

, Check that “Control for HDMI” and

“HDMI: Linked to TV-off” are set to “On”
(page 30).

Playback does not start from the
beginning of content.

, Press OPTIONS, and select “Play from

beginning.”

Playback does not start from the resume
point where you last stopped playing.

, The resume point may be cleared from

memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.

The disc tray does not open and
“LOCKED” or “TLK ON” appears on the
front panel display.

, When “LOCKED” appears, the player is

locked. To cancel the Child Lock, hold
down N on the player until “UNLOCK”
appears on the front panel display (page 8).

, When “TLK ON” appears, contact your

Sony dealer or local authorized Sony
service facility.

The disc tray does not open and you
cannot remove the disc even after you
press
Z.

, Try the following:

1

Turn the player off,

and disconnect the AC power cord.

2

Reconnect the AC power cord while

pressing down Z on the player.

3

Keep

pressing down Z on the player until the tray
opens.

4

Remove the disc.

5

When

“OPEN” appears on the front panel display,
hold down [/1 on the player for more than
10 seconds until the player turns off.

“Control for HDMI” (BRAVIA
Sync)

Others

Advertising