SIIG 04-0621B - Manual (Page 5)

1
2
3
4
5
Figure 7
Figure 8
Figure 11
Swivel Adjustment
Figure 12
If the swivel joints are too loose or too tight, they can be adjusted using the wrench
(L) provided in the hardware kit (Figure 10).
Figure 9 Figure 10
Secure the cables from your LCD TV / Monitor using the supplied cable
ties (Figure 11).
Tighten the bottom screw to lock the bracket (Figure 9).
Tilt the display to the desired angle (Figure 8).
Tighten the middle screw to secure the tilt angle (Figure 10).
Check the mounting screws every two months for tightness.
Maintenance
Hang the display plate onto the top of the wall plate and slip onto the
wall plate as shown (Figure 7).
Step 3 Final Installation & Adjustment
5