SUPER MICRO Computer SUPERSERVER 6014L-M - Manual (Page 25)

Chapter 2: Server Installation
2-9
Figure 2-5. Installing the Server into a Telco Rack
(w/ Optional Rackmount Kit)
2. Check the CPUs (processors)
You may have one or two processors already installed into the system board.
Each processor should have its own heatsink attached. See Chapter 5 for
instructions on processor installation.
3. Check the system memory
Your 6014L-M server system may have come with system memory already
installed. Make sure all DIMMs are fully seated in their slots. For details on
adding system memory, refer to Chapter 5.