To change temperature setting, To change air flow direction, How to operate – Sharp AF-06ERL User Manual
Page 12: Display will change as you touch the pad, During cooling operation
12
HOW TO OPERATE
TO CHANGE AIR FLOW DIRECTION
Horizontal louvers
Adjust UP/DOWN air flow
The horizontal louvers are used to adjust the UP/DOWN direction of air flow, and the vertical
louvers are used to adjust the LEFT/RIGHT direction of air flow for uniform and efficient cooling
of the room.
Vertical louvers
Adjust LEFT/RIGHT air flow
Lever
---
Lower temp.
Touch the TEMPERATURE setting
pad to adjust the temperature set-
ting.
• Temperature can be set within the range
of 64
°F to 86°F.
• Display will change as you touch
the pad.
NOTE:
• In fan only (HIGH FAN, MED FAN, LOW FAN) operation, the temperature display will go off and
the temperature setting cannot be changed.
• In cases of power outages or when the unit is disconnected; when the power is restored or the
unit is plugged in, the unit and display will return to the preset conditions of 74
°F and HIGH
COOL. The unit will not automatically turn back on. The user must touch POWER ON/OFF to
resume operation.
During cooling operation
TO CHANGE TEMPERATURE SETTING
---
Raise temp.
hr
F
POWER
ON/OFF
TEMP
COOL
SLEEP
SELECTOR
ENERGY
TIMER
SAVER
ON/OFF
TEMPERATURE setting pad