Sony NE830LS - Manual (Page 29)

Connecting Other
Devices
You can listen to CDs through a stereo system
and record CDs on a cassette tape. See the
instruction manual that comes with the device
you want to connect.
Be sure to turn off all devices before making
the connections and changing the settings
explained below.
to 
(headphones)/
LINE OUT
Connecting cord
(minijack, not
supplied)
Left (white)
Right (red)
AV amplifier, active
speaker, cassette
recorder, etc.
You need to change the setting for “AUDIO
OUT” so that sound is output to the connected
device. The settings of “AUDIO OUT” are
shown below. To make those settings, see 
page 25, 27.
Connected device Setting
Headphones HEADPHONE
Device connected using
the connecting cord
LINE OUT
When you connect another device, set this
to “LINE OUT.” When the setting is “LINE
OUT,” volume cannot be adjusted using
either the player or the remote, and the sound
function does not work.
Notes
• Before you play a CD, turn down the volume
of the connected device to avoid damaging the
connected speaker.
• Use the AC power adaptor for recording. If you
use the rechargeable battery or a dry battery as a
power source, the battery may become completely
depleted in the middle of recording.
• To record high quality CD sound, set
“G-PRO (G-PROTECTION)” to “1.”
29
Playback
D-NE830/NE830LS.GB.2-653-429-12(1)