Smeg BL1 - Manual (Page 12)

User instructions
33
MOVING THE FACING PANEL
To lower the facing panel and reveal the FRONT DISPLAY, proceed as follows:
• Make sure that the door is closed;
• Push the facing panel down until the whole of the display is visible. To return the facing panel
to the normal position, push it back up.
WARNINGS !
• The facing panel can only be lowered with the door closed;
• Once the facing panel has been lowered the door cannot be opened (see diagram);
• Before opening the door of the dishwasher make sure that the facing panel is in the high
position;
• Never lower the facing panel and close the door simultaneously; first close the door, then
lower the facing panel;
• never raise the facing panel and open the door simultaneously; first bring the facing panel to
the high position, then open the door.
COMPLIANCE WITH THE INSTRUCTIONS PROVIDED ABOVE
ENSURES THE CORRECT OPERATION BOTH OF THE SLIDING
SYSTEM OF THE FACING PANEL AND OF THE DISHWASHER
ITSELF.