Simaudio MOON Evolution Series - Manual (Page 11)

MOON Andromeda CD Player
Front Panel Controls (continued)
The “Display” button allows you to adjust the brightness of the large digital display window. It also provides you with the
option of turning off the display. There are three (3) different levels of brightness; The default is medium. Pressing the
“Display” button once will increase the level to medium. Pressing the button a second time will further increase the brightness
to the highest setting. Pressing the “Display” button a third time returns the display to its default setting of low.
If you want to turn the display off, press and hold the “Display” button for 3 seconds. When the display is turned off, it will
still come back on for a short period of time whenever you press any of the buttons located on the front panel or the remote
control, using the brightness level that was previously established; the display will automatically turn off again once you are
done. To turn the display back on, simply press and hold the “Display” button for 3 seconds.
The sonic performance of the MOON Andromeda CD Player may improve slightly when the display is turned off.
The “Program” button allows you to program a selection of tracks in the order that you wish to listen them. After loading a
compact disc into the Andromeda, select the first track you wish to listen to, using the
or buttons and then press
“Program”. To program a second track, select it the same way you did for the first one and press “Program” again. Repeat
this operation as many times as you want to program tracks to a maximum of 30 tracks. Once you’ve completed programming
your track selection(s), the digital display window will show the number of tracks that have been programmed and their total
time.
To begin playing your programmed selections, simply press the X button. Pressing
„
will only suspend the playing of the
programmed selection. Pressing
„
a second time will clear your program selection from the Andromeda’s memory. As well,
opening the top drawer at any time will also clear your program. After you begin creating your program list, the LED
immediately to the right of the “Program” button will illuminate and remain on until you clear your program from memory.
Pressing the “Repeat” button once results in the entire disc being played again once it has reached the end of the final track.
Pressing “Repeat” a second time will result in the track currently playing being repeated again once it has ended. To cancel
this mode, simply press the “Repeat” button a third time or open the CD drawer. There are two (2) LED’s located to the right
of the “Repeat” button; The top one will illuminate when the current track is being repeated and both will illuminate when the
entire disc is being repeated.
If you have created a program of selected tracks, pressing “Repeat” once will result in your entire program repeating itself
once it has completed its cycle; Pressing “Repeat” a second time will result in the current track from your program being
played again once it has ended; Pressing “Repeat” a third time will terminate the “Repeat” mode.
The “Random” button, when pressed, will play each of the tracks on a compact disc in a completely random order, as opposed
to the sequential order as they appear on the disc. If you have already created a program of selected tracks, it will play these
programmed tracks in a random order. The LED located immediately to the right of the “Random” button will illuminate when
you’ve engaged the random mode.
____________________________________________________________________________________
Front Panel Controls 11